Author Topic: Gaskets  (Read 1009 times)

DanielSon-gtt

  • 200BHP Senior Member
  • ****
  • Posts: 970
    • View Profile
Gaskets
« on: 17:49, Sun 01 May 2011 »
Who's using what for turbo gaskets I used the metal gaskets from cgb but the just crack and cause blowing
Go Boost Or Go Home

fordy

  • 200BHP Senior Member
  • ****
  • Posts: 242
    • View Profile
Re: Gaskets
« Reply #1 on: 17:59, Sun 01 May 2011 »
i'm using a 2ltr 200sx manifold gasket its about 2-3mm thick and has a special lead lining last years but they are expensive
and then a cgb elbow gasket which is paper thin and had to use paste to make it seal as the elbow needs skimming but nowhere is open on a bank holiday weekend   :roll: