Author Topic: Hi there  (Read 1666 times)


  • 115BHP Newbie
  • *
  • Posts: 1
    • View Profile
Hi there
« on: 11:00, Wed 29 April 2009 »
Hi, I'm Alex from Nuneaton in Warwickshire. Come across this site and I thought it would be useful to me. Me and a friend of mine are putting a GT turbo engine into an old Twingo but because neither of us have much experience with 5 turbos (or puting 5 engines into Twingos for that matter), from time to time we come across little things that make us scratch our heads. So hopefully I can find some useful info here.

One of thing I need advice on is where would be the best place to get the engine set up after we have finished installing it? I know guys like K-Tec or BB Tuning have a decent reputation but both of them are a bit of a treck from me. Prima Racing was another option I was considering but I have not had any experience with them.

Any thoughts?


  • 200BHP Senior Member
  • ****
  • Posts: 494
    • View Profile
(No subject)
« Reply #1 on: 11:20, Wed 29 April 2009 »
if u mean sorting out ur fuelling, i wud suggest getting a wideband kit an jetting the carb urself. there's a very good guide about carb jetting in the "do it yourself" section.

after thought, heres the link ... php?t=1471
everybody needs to watch this film >>>>>endgame by alex jones


  • 170BHP Member
  • ***
  • Posts: 65
    • View Profile
(No subject)
« Reply #2 on: 12:30, Wed 29 April 2009 »
ktec were really nice guys like, had my carb rejetted there n set up. depends like if u dnt wanna do it like me they did a good job and results were brill on my nearly standard 5
if there aint no rust it aint worth drivin!!