Author Topic: Bendix unit  (Read 913 times)

philb**

  • 150BHP Member
  • **
  • Posts: 20
    • View Profile
Bendix unit
« on: 23:29, Sat 11 April 2009 »
How important is it that the dump valve is t pieced to the bendix unit and not straight to the carb bottom as the unit on mine has broken where the vacuum pipe fits on !

Cheers
Phil

scratcher

  • Global Moderator
  • 200BHP Senior Member
  • *****
  • Posts: 1891
    • View Profile
(No subject)
« Reply #1 on: 15:07, Mon 13 April 2009 »
You deffo need one from the manifold to AEI otherwise it won't know how much pressure you're running and cause all sorts of disasters!

stoneboy2k3

  • 200BHP Senior Member
  • ****
  • Posts: 243
    • View Profile
(No subject)
« Reply #2 on: 16:10, Mon 13 April 2009 »
Also u get a vacuum reading frm the manifold, u dnt frm the carb

fishead

  • 200BHP Senior Member
  • ****
  • Posts: 247
    • View Profile
(No subject)
« Reply #3 on: 17:56, Mon 13 April 2009 »
the aei will need this reference line so it can adjust the ign timing, it is important.
an if the carb out is below the venturi it will see vacuum

philb**

  • 150BHP Member
  • **
  • Posts: 20
    • View Profile
(No subject)
« Reply #4 on: 14:57, Wed 15 April 2009 »
Cheers chaps under closer inspection no wonder its not connected the vacuum advance pipe has been broken off nice !!