Author Topic: Fiting A Clutch  (Read 2283 times)

DanielSon-gtt

  • 200BHP Senior Member
  • ****
  • Posts: 970
    • View Profile
Fiting A Clutch
« on: 23:38, Sat 28 February 2009 »
Can Somebody Tell Me How Hard It Is To Fit A Clutch As Mines Need Replacing And I Have The Engine Striped to The Head At The Moment
Is There A Write Up Picture Diagram Or Anythink

I Can Get A Brand New Valeo Clutch For 30 Is That Cheap Or Average
Go Boost Or Go Home

Ash-Lee

  • Global Moderator
  • 200BHP Senior Member
  • *****
  • Posts: 4208
    • View Profile
(No subject)
« Reply #1 on: 00:15, Sun 01 March 2009 »
Pull the engine out, you will have more space while the heads off.

You might be able to pull the engine across and slot the clutch in but i wouldn't recommend that, it will be near impossible to line it up correctly.

DanielSon-gtt

  • 200BHP Senior Member
  • ****
  • Posts: 970
    • View Profile
(No subject)
« Reply #2 on: 00:28, Sun 01 March 2009 »
Umm Im Not To Clued Up On Taking A Engine Out  :lol:
Im Going To Need Step By Step Instructions  :oops:
Go Boost Or Go Home

LEE

  • Administrator
  • 200BHP Senior Member
  • *****
  • Posts: 1791
    • View Profile
    • http://www.renault5gtturbo.com
(No subject)
« Reply #3 on: 00:29, Sun 01 March 2009 »
DanielSon-gtt how come every word you type is with a capital letter ??
Site Administrator

Ash-Lee

  • Global Moderator
  • 200BHP Senior Member
  • *****
  • Posts: 4208
    • View Profile
(No subject)
« Reply #4 on: 00:29, Sun 01 March 2009 »
Theres one in the DIY section.

Let me know if you get stuck.

DanielSon-gtt

  • 200BHP Senior Member
  • ****
  • Posts: 970
    • View Profile
(No subject)
« Reply #5 on: 00:31, Sun 01 March 2009 »
I Dont Really Know Lee Just Gives The Left Hand Something To Do Wial Typing Just A Habit I Cant Kick :lol:
Go Boost Or Go Home

DanielSon-gtt

  • 200BHP Senior Member
  • ****
  • Posts: 970
    • View Profile
(No subject)
« Reply #6 on: 00:40, Sun 01 March 2009 »
I Tryed Looking For It In The DIY Section But I Cant Find It Could You Pinpoint It For Me
Go Boost Or Go Home

5teve L

  • Global Moderator
  • 200BHP Senior Member
  • *****
  • Posts: 3540
    • View Profile
(No subject)
« Reply #7 on: 08:04, Sun 01 March 2009 »

owe

  • 200BHP Senior Member
  • ****
  • Posts: 494
    • View Profile
(No subject)
« Reply #8 on: 09:28, Sun 01 March 2009 »
the diy section is very good on here but u need to invest ina haynes manual aswell. i got one off ebay for a 4 including postage
everybody needs to watch this film >>>>>endgame by alex jones

Brigsy

  • 170BHP Member
  • ***
  • Posts: 141
    • View Profile
(No subject)
« Reply #9 on: 11:04, Sun 01 March 2009 »
Engine ooot or struggle with it in situ.

DanielSon-gtt

  • 200BHP Senior Member
  • ****
  • Posts: 970
    • View Profile
(No subject)
« Reply #10 on: 12:44, Sun 01 March 2009 »
i hit the search button on the diy section and search for fitting a clutch not engine removing thats probably why
Go Boost Or Go Home

mat_pithers

  • 170BHP Member
  • ***
  • Posts: 93
    • View Profile
(No subject)
« Reply #11 on: 17:08, Sun 01 March 2009 »
i just took my gearbox out 2day and refitted a new 1 what a pain if your not to clued up take it some where to be done or get some 1 off here to come give you a hand
baysidecustoms body shop tell: 01227372868