Author Topic: would these fit my 5??  (Read 3989 times)


Ash-Lee

  • Global Moderator
  • 200BHP Senior Member
  • *****
  • Posts: 4208
    • View Profile
(No subject)
« Reply #1 on: 18:44, Tue 19 August 2008 »
Because of the width they might scrub on the rear arches, depends how low and stiff you go i suppose.

James5

  • Test
  • Global Moderator
  • 200BHP Senior Member
  • *****
  • Posts: 2772
    • View Profile
(No subject)
« Reply #2 on: 18:49, Tue 19 August 2008 »
All depends on the ET and stud fitment aswell matey width wise 7.5 may be the max you could go may possibly rub

dgdogz

  • 200BHP Senior Member
  • ****
  • Posts: 447
    • View Profile
(No subject)
« Reply #3 on: 18:52, Tue 19 August 2008 »
what about with spacers???




new pic

James5

  • Test
  • Global Moderator
  • 200BHP Senior Member
  • *****
  • Posts: 2772
    • View Profile
(No subject)
« Reply #4 on: 19:02, Tue 19 August 2008 »
As said what ET fitmet are they and stud pattern. If you put spacers on that will push them out to the arch (Which you could always skim the arch / sand / file it down so no rubbing on that side).

jure

  • 200BHP Senior Member
  • ****
  • Posts: 1465
    • View Profile
    • http://www.renault-klub.hr
(No subject)
« Reply #5 on: 21:56, Tue 19 August 2008 »
They won't fit under standard arch. I tried....

Also, this one on you pic is 9" wide which is out of league for any french car.

dgdogz

  • 200BHP Senior Member
  • ****
  • Posts: 447
    • View Profile
(No subject)
« Reply #6 on: 14:30, Wed 20 August 2008 »
but thy will fit???
the 7.5 inch??/
d

jure

  • 200BHP Senior Member
  • ****
  • Posts: 1465
    • View Profile
    • http://www.renault-klub.hr
(No subject)
« Reply #7 on: 15:49, Wed 20 August 2008 »
Yes. 7.5 will fit without problem. If car is lowered more than 50mm watch out that ET is around 40  :wink:

Probably, this kind of rim has ET 25 to 15 but you can grind off "extra" 15-20mm :)

dgdogz

  • 200BHP Senior Member
  • ****
  • Posts: 447
    • View Profile
(No subject)
« Reply #8 on: 16:41, Wed 20 August 2008 »
thank you
im gona look into gettin these asap
i think  ther really cool
d

jure

  • 200BHP Senior Member
  • ****
  • Posts: 1465
    • View Profile
    • http://www.renault-klub.hr
(No subject)
« Reply #9 on: 20:28, Wed 20 August 2008 »
Yeah, they really look nice. My suggestion is to buy them with de-badged central cap 8)


smithsgtt

  • 200BHP Senior Member
  • ****
  • Posts: 1021
    • View Profile
(No subject)
« Reply #11 on: 11:53, Thu 21 August 2008 »
Well you know the price mate ive got you agood discount on them let me know anytime
7.5x16 195/45/16
cheaper then anywhere else

jure

  • 200BHP Senior Member
  • ****
  • Posts: 1465
    • View Profile
    • http://www.renault-klub.hr
(No subject)
« Reply #12 on: 16:46, Thu 21 August 2008 »
Quote from: "dgdogz"
what is ET???


ET is the number that shows how much mm central hub of the wheel is "inside" the wheel comparing to outer center. For example if you ET is 40 that means that central hub is 4cm inside the wheel...

Larger ET gives you more space under the arch and you can fir wider rims.

dgdogz

  • 200BHP Senior Member
  • ****
  • Posts: 447
    • View Profile
(No subject)
« Reply #13 on: 09:01, Fri 22 August 2008 »
so et is the inside of the rim width???

or am i wrong??

smudger

  • 200BHP Senior Member
  • ****
  • Posts: 313
    • View Profile
    • http://smudger.fotopic.net
(No subject)
« Reply #14 on: 09:12, Fri 22 August 2008 »
This is making my head hurt. It's far too confusing for me  :lol: