Author Topic: Trying to wire in remote central locking  (Read 2450 times)

sparkysparks

  • 200BHP Senior Member
  • ****
  • Posts: 967
    • View Profile
Trying to wire in remote central locking
« on: 20:54, Thu 14 June 2012 »
Hi guys. My wiring has live, neutral, indicators left and right, then 6 signal wires. 4 of which are short.

How am i tapping them into the system?

I tried on the lock button, but that didnt work.

Any ideas guys?

sparkysparks

  • 200BHP Senior Member
  • ****
  • Posts: 967
    • View Profile
Re: Trying to wire in remote central locking
« Reply #1 on: 20:27, Fri 15 June 2012 »
Ok, ive tried all possible connections, and nothing. All i can get is sparks between 2 wires.
Nothing seems to be happening according to the multimeter. Ive attached what the internet says and pressed the button, nothing.

I really need help on this guys.

Has anyone wired their own on a 5?

numpysnumnuts

  • 130BHP Member
  • *
  • Posts: 13
    • View Profile
Re: Trying to wire in remote central locking
« Reply #2 on: 17:35, Thu 13 September 2012 »
Are these the wires in the doors or at the button or on the connector block by the doors?

2 are electric windows - Orange / Green
2 are speakers - Orange / Orange
4 are door locks

sparkysparks

  • 200BHP Senior Member
  • ****
  • Posts: 967
    • View Profile
Re: Trying to wire in remote central locking
« Reply #3 on: 18:10, Thu 13 September 2012 »
Um i cant remember now, i got it done in the end, but thanks