mounting F7p into GTT

[LazaRs]

Ok guys, i finally got an engine for my GTT, after long time. Can anyone tell me how to fit the engine into my GTT ? Can i keep the GTT gearbox ?

What Mounts i need for conversion ? pictures would be great if u have guys!

[andybond]

I believe you can keep the five box.

You will need GTX engine mounts.

Or drill the GT ones ..

[5teve L]

Yes, you can keep the box as above, you need the GTX engine mount for the front & also the GTX or Volvo alternator mounting to block.
You can re-drill the GTT mount to make it fit, I had to & it worked ok, I had to elongate the holes I made to make it sit right, maybe get some cardboard to get the pattern then drill once, unlike me  :mrgreen:
There may be a write up in the DIY section.

[LazaRs]

Yes, you can keep the box as above, you need the GTX engine mount for the front & also the GTX or Volvo alternator mounting to block.
You can re-drill the GTT mount to make it fit, I had to & it worked ok, I had to elongate the holes I made to make it sit right, maybe get some cardboard to get the pattern then drill once, unlike me  :mrgreen:
There may be a write up in the DIY section.

Thanks, there is no write up in DIY , is there any chance that you can post some pictures of F7P engine fitting into GTT ? ? OR if u have any link that u can send me where i can see the pics of the actual conversion ?

Thanks!!!!

[5teve L]

DIY section.... viewtopic.php?f=14&t=9345

My old build..... viewtopic.php?f=2&t=8450&p=69678&hilit=raider+f7p&sid=91c2493b707c0243dd5dc72f59f35077#p69678

info in your own thread.... viewtopic.php?f=10&t=11240&p=73837&hilit=f7p+turbo&sid=91c2493b707c0243dd5dc72f59f35077#p73837