Author Topic: Relay?  (Read 1627 times)

nick1983

  • 170BHP Member
  • ***
  • Posts: 112
    • View Profile
Relay?
« on: 17:30, Fri 02 December 2011 »
Can anyone tell me if the 5's have a relay for the heater fan? Checked the fan itself the switch and the wiring and it still doesn't work. I nearly got hypothermia this morning in it.
Head ported,polished,valves reseated uprated valve springs
270 cam
Modified carb, large venturi
2.5in downpipe
large elbow
2.5in side exit
Paceintercooler
samco blue hoses
Green induction kit
T25 turbo
Forge actator
Ktec large drilled disc conversion,
APEX rear shocks, 35mm front springs.

James5

  • Test
  • Global Moderator
  • 200BHP Senior Member
  • *****
  • Posts: 2772
    • View Profile
Re: Relay?
« Reply #1 on: 17:58, Fri 02 December 2011 »
Quote from: "nick1983"
Can anyone tell me if the 5's have a relay for the heater fan? Checked the fan itself the switch and the wiring and it still doesn't work. I nearly got hypothermia this morning in it.


Normally the fault is the connections in which the fan slots into, you will need to remove AEI, fan cover, and pull the fan up and out and clean up the connections you may need to pinch up the connections slightly

Ash-Lee

  • Global Moderator
  • 200BHP Senior Member
  • *****
  • Posts: 4208
    • View Profile
Re: Relay?
« Reply #2 on: 18:41, Fri 02 December 2011 »
As above.

I found it possible to remove with the AEI left in place. No doubt it's easier to do with it removed though.

nick1983

  • 170BHP Member
  • ***
  • Posts: 112
    • View Profile
Re: Relay?
« Reply #3 on: 18:47, Fri 02 December 2011 »
Ok then thanks boys I'll give it a go tomorrow. Cheers for the advice.
Head ported,polished,valves reseated uprated valve springs
270 cam
Modified carb, large venturi
2.5in downpipe
large elbow
2.5in side exit
Paceintercooler
samco blue hoses
Green induction kit
T25 turbo
Forge actator
Ktec large drilled disc conversion,
APEX rear shocks, 35mm front springs.