Author Topic: omex rev limiter and launch control  (Read 5717 times)

Ruske

  • 200BHP Senior Member
  • ****
  • Posts: 175
    • View Profile
    • http://www.youtube.com/user/RuskeCRO
omex rev limiter and launch control
« on: 23:15, Mon 07 November 2011 »
http://www.omextechnology.co.uk/page2.html

has anybody installed it on his GTT?

are there any cons?

how to connect this to the coil?

i'd like to hear some of your experiences...

thx

tubbyG

  • 200BHP Senior Member
  • ****
  • Posts: 409
    • View Profile
Re: omex rev limiter and launch control
« Reply #1 on: 00:11, Tue 08 November 2011 »
I just installed an armtech revlimiter today. It has flat shifting capability but I didnt get the switch for it unfortunately

Launch controll would be awesome B-)

Was really easy to install the armtech device, in this pic you can see where I mounted it on the aei unit.
It connects to the coil +tve and -tve, with a ground also.



I can get you another pic which shows exactly where you connect the wires to if you like

Ruske

  • 200BHP Senior Member
  • ****
  • Posts: 175
    • View Profile
    • http://www.youtube.com/user/RuskeCRO
Re: omex rev limiter and launch control
« Reply #2 on: 00:39, Tue 08 November 2011 »
yes i'd like a more detailed pic, if you can provide me

thanks

tubbyG

  • 200BHP Senior Member
  • ****
  • Posts: 409
    • View Profile
Re: omex rev limiter and launch control
« Reply #3 on: 16:48, Tue 08 November 2011 »
here you go, .......this is what I used as a guide to connect the wires



Ash-Lee

  • Global Moderator
  • 200BHP Senior Member
  • *****
  • Posts: 4208
    • View Profile
Re: omex rev limiter and launch control
« Reply #4 on: 18:57, Tue 08 November 2011 »
When i fitted an Armtech rev limiter i removed the coil and soldered the 2 wires onto the contacts the coil pushes into.

Or, as above, you could drill the plastic to uncover the one connection.

Ruske

  • 200BHP Senior Member
  • ****
  • Posts: 175
    • View Profile
    • http://www.youtube.com/user/RuskeCRO
Re: omex rev limiter and launch control
« Reply #5 on: 19:49, Tue 08 November 2011 »
tubby, you are my savior...

thank you very much!!!

thx also to you ash