Author Topic: help  (Read 1992 times)

ben marks

  • 200BHP Senior Member
  • ****
  • Posts: 150
    • View Profile
help
« on: 17:32, Sat 24 September 2011 »
Hey
just a quick two
where does the hose go from the aei go on to the carb
Also where does the hose from the fuel inricher on the carb go to is it to the double t piece
Would be a great help my manual is crap lol
thanks Ben

Ash-Lee

  • Global Moderator
  • 200BHP Senior Member
  • *****
  • Posts: 4208
    • View Profile
Re: help
« Reply #1 on: 22:39, Sat 24 September 2011 »
Vacumn pipe from the AEI connects to the inlet manifold, it's right at the base of the carb at the rear. Look between the 2 large breather pipes there and you should see it.

Do you mean the double T piece on the left hand side of the carb? One goes back onto the carb, the other goes to the standard boost gauge.

ben marks

  • 200BHP Senior Member
  • ****
  • Posts: 150
    • View Profile
Re: help
« Reply #2 on: 07:19, Sun 25 September 2011 »
Excellent mate great help just one more thing Im stuck on is on the turbo side of the carb under the 2 take offs for the turbo acurator the is another take off on that carb its self think its the inricher but not sure where does that go to ? I will take a pic if ya not sure wot i mean
thanks alot Ben

ben marks

  • 200BHP Senior Member
  • ****
  • Posts: 150
    • View Profile
Re: help
« Reply #3 on: 07:23, Sun 25 September 2011 »
Just to add another thin where does the pipe come from off the carb  that is ment to go to no where lol the one that drains fuel off to stop it just comin out on to the manifolds
Sorry for all the questions my manual is not the best and the bloke that had it before me didnt have a clue lol
Ben

scratcher

  • Global Moderator
  • 200BHP Senior Member
  • *****
  • Posts: 1891
    • View Profile
Re: help
« Reply #4 on: 19:41, Sun 25 September 2011 »
The one towards the front on the turbo side should be routed down to the front of the gear box mate.


ben marks

  • 200BHP Senior Member
  • ****
  • Posts: 150
    • View Profile
Re: help
« Reply #5 on: 19:44, Sun 25 September 2011 »
Spot on thanks that's that all sorted lol
Great help guys