Author Topic: How to tell if a piper cam (Read 2022 times)

sparkysparks · « **on:** 15:57, Wed 07 September 2011 »

Ive just got hold of 2 cams. Both have 270 stamped on them and in the box of bits i got it had a piper leaflet.

Any way i can find out if there the proper stuff.

Also would one of them fit a campus and add any power?
Cheers
Mark

James5 · « **Reply #1 on:** 16:16, Wed 07 September 2011 »

What's stamped on the end's?

If the 270 is say down the shaft itself OE cam's have that stamped on, but look at the en of the cam on the smooth end it should have stamp marks on

sparkysparks · « **Reply #2 on:** 17:07, Wed 07 September 2011 »

c28 u97
c21 s95

Dunno if that helps

James5 · « **Reply #3 on:** 18:07, Wed 07 September 2011 »

Quote from: "sparkysparks"

c28 u97
c21 s95

Dunno if that helps

Look like standard cam markings to me if the were Piper or similar they would have stamped BP285 or similar stamped on the end's

sparkysparks · « **Reply #4 on:** 18:21, Wed 07 September 2011 »

Ok cheers. Wonder where the leaflet came from.

James5 · « **Reply #5 on:** 19:43, Wed 07 September 2011 »

Quote from: "sparkysparks"

Ok cheers. Wonder where the leaflet came from.

The only way to know for definate if the cam's are 285 or similar is to measure the lobes, I know my old MSM cam didn't have anything stamped on the end at all but was a 285

sparkysparks · « **Reply #6 on:** 23:47, Wed 07 September 2011 »

How do i measure it, all i can find on the net is measuring the lift and thats of no use to me

Author Topic: How to tell if a piper cam (Read 2022 times)

sparkysparks

How to tell if a piper cam

James5

Re: How to tell if a piper cam

sparkysparks

Re: How to tell if a piper cam

James5

Re: How to tell if a piper cam

sparkysparks

Re: How to tell if a piper cam

James5

Re: How to tell if a piper cam

sparkysparks

Re: How to tell if a piper cam