Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - scratcher

Pages: [1] 2 3 4
1
Spotted / Was It You? / Red 5 in Basingstoke.
« on: 00:04, Fri 09 December 2011 »
I keep forgetting to ask if it's anyone on the site.

We're working at the college in Basingstoke and a few times there has been a red phase 2 in the car park. Looks pretty original.

Anyone know it?

2
Spotted / Was It You? / sparkysparks.
« on: 12:05, Sun 06 November 2011 »
We saw you yesterday morning on the M1 after Watford. I was going to text you but I forgot.
The Campus really stands out  8)

3
Media / Awesome Fest Video
« on: 22:14, Wed 10 August 2011 »
Definitely looks like one to attend next time.

http://www.vimeo.com/27476047

4
Media / Photobucket
« on: 01:50, Sat 30 July 2011 »
Does anyone enter the little competitions on Photobucket?
I've just started getting into Photography and saw them so thought I'd have a bit of fun  :D

Here's my entries

http://photobucket.com/ibeatyou?entry=1805495

http://photobucket.com/ibeatyou?entry=1805504

I'll even let you give mine a vote that's how generous I am  :lol:

5
General Chat / Cleaning Your Car
« on: 22:59, Thu 14 July 2011 »
Is anyone else a bit obsessed?  :oops:

I clean both my cars at least once a week and try and fit my Mum and Dad's cars in when I can too. Is this normal behaviour on the forum?


Please don't abuse me too much!  :lol:  :lol:

6
Events/Shows/Cruises / Ace Cafe - London - 20/06
« on: 18:32, Sun 19 June 2011 »
French night is on at Ace Cafe tomorrow night.

Who's going to pop down?  8)

7
Events/Shows/Cruises / Ace Cafe - London - Tonight
« on: 00:33, Mon 21 March 2011 »
Is anyone heading to the Ace Cafe this evening?

I'm going for the first time since November  :D

8
Media / Drum Fun
« on: 11:41, Mon 08 November 2010 »
I found a link to this through a Jimmy Eat World site. Its a good laugh  :D

http://www.ronwinter.tv/drums.html

9
Media / Transformers
« on: 08:45, Mon 08 November 2010 »

10
General Chat / Happy Father's Day
« on: 12:36, Sun 20 June 2010 »
Happy father's day to all the daddys out there.

Anyone got big plans for the day?

11
Your cars / My Evo V
« on: 19:16, Sun 25 April 2010 »
I just picked up my new 5  :D
I needed something to run about in after selling the KA and the blue 5 is too bumpy for every day use.

So I done the 300 odd mile round trip to pick this one up.

Some specs:

APEXi boost gauge
Big brakes
Big wheels
Blitz Turbo timer
APEXi cone filter
Blow off valve  8)

I'll get some pics up when its nice and clean. The motorway and rain weren't kind to it.

12
Events/Shows/Cruises / Ace Cafe 19th April
« on: 18:48, Mon 05 April 2010 »
I thought I'd get this up with a bit of notice this month.

The next Frenchy night at Ace Cafe is on Monday the 19th.
Good food, good chats... and this will be the first one of the year where it won't be dark at 5 o'clock and some nice cars will be out of hibernation  :D

Any takers?

14
Do it yourself / Starter Motor Change
« on: 17:46, Fri 26 March 2010 »
I decided to do a little write up on how to change a starter motor without removing too many other parts in the engine bay making it quicker and easier  :D

The tools you will need:

Jack and Axle Stands.
13mm spanner (optional)
13mm socket
16mm spanner
16mm socket
Extention bar
Flat headed screw driver
A torch is handy too.

Time taken:

It will vary, today it took me 40 minutes to change, with a coffee stop and time to take photots.



Step one:

Disconect the battery terminals, the starter motor has a direct live so you don't want it shorting out!
Now jack up the car and remove the Driver's side wheel. Yes, the driver's one.


Step Two:

Now the wheel is out of the way, you will be able to look up through the arch and see the starter motor at the back of the engine block


Now take your 13mm socket with the extension bar and undo the 13mm nut on the lower part of the starter motor and pull off the solenoid wire.
Tuck these cables down out of the way so they don't get trapped when you fit your new starter motor.

Step Three:

Walk around to the passenger side of the car. Here you will need your 16mm socket, spanner and the screwdriver.
I found it easiest to remove the air filter for extra room to get to the bolts to release the starter.


There are three 16mm bolts holding the unit to the gear box. two at the top and one lower down. Undo these three bolts.

( I realise I missed a bolt through the hole  :lol: )

Step Four:

Walk back around to the driver's side and reach in to the starter motor. Give it a wiggle and it will come free. Now you can wriggle and jiggle out through the wheel arch.

Hey-Presto... Its out!


If you're lucky the locating dowel will have stayed in place. If not, take a not of where it should be and put it back, It'll make the re-fitting much easier.


Step Five:

Fitting the new starter motor is the reverse of removal.
Start by offering the new unit up through the driver's side arch, with the terminal lug side towards the bulkhead.

With a wriggle and a push you will be able to push it through to where it will need to be.


Step Six:

Now, back to the passenger side with the 16mm spanner and socket again.
Reach in and lift the starter motor up to sit on the locating dowel and slide a bolt in to hold it steady. I found it easiest to get the top left bolt in first, and do it up, but not tight just yet.
With the top bolt in the unit should be nicely in place to get the remaing two bolts in and nip them all up tight.

Step Seven:

Back to the driver's side.
Remember the three cables you tucked out of the way? Now, pull them back up to where they want to be.

Reach in and pop the solenoid wire back on to its connection.
Then get the two cables with the lugs (from battery and from the altenator) and slot them onto the threadded terminals nearest the bulkhead. Now put a nice anti-vibration washer and 13mm nut on and tighten with your 13mm socket.




You can now re-connect the battery and give it a test.
Check you haven't left any tools inside the bay.
Refit the wheel.

Now go for a drive  :D

I really hope this is of some help to at least one person. :lol:

If you have any other tricks and tips to add, or if I've made a mistaake, feel free to post up 8)

15
General Chat / Dishwasher Cleaning...
« on: 22:00, Wed 30 December 2009 »
Not after advice on how to clean the dishwasher  :lol:

My breather hoses are still a bit gunky inside from a previous problem. Can I be extra lazy and bung them in the dishwasher? I guess the swirl pot wouldn't be a good idea in case the high temps melt the glues, but surely the hoses will be fine?

Try not to take the pee too much  :D

Pages: [1] 2 3 4