RENAULT5GTTURBO.COM

GENERAL => Newbies => Topic started by: Mowe1979 on 22:17, Thu 21 March 2013

Title: Campus sleeper project
Post by: Mowe1979 on 22:17, Thu 21 March 2013
I have brought an unfinished r5 campus sleeper project (with a 1.8 16v) mechanically fitted, but not wired up. I would like to keep it looking as much like a campus as possible ( bit lower and different wheels).

I am currently working out what needs to be done and what will need to be brought. I will be stripping the shell back soon (when the weather warms up a bit!) to see if tin worm has been eating the underside.

My first set of questions (the first of many I presume) are:

-what is different between the campus and gtt suspension set up? I guess stiffer anti roll bars and dampers? But is the rear axle/front arms the same, or would I need a full gtt to strip?

- is there anywhere (other than a Haynes manual) that I can get wiring diagrams for the 1.8 16v engine and campus?

Early days but really excited!!
Title: Re: Campus sleeper project
Post by: James5 on 22:07, Sat 23 March 2013
I believe the campus looms iovery similair to the gtt in that it is missing a few wires but not really a problem as they wont be needed.

See the following link

viewtopic.php?f=14&t=9345 (http://www.renault5gtturbo.com/forum/viewtopic.php?f=14&t=9345)