RENAULT5GTTURBO.COM

TECHNICAL ISSUES => Renault 5 GT Turbo => Topic started by: Ruske on 23:15, Mon 07 November 2011

Title: omex rev limiter and launch control
Post by: Ruske on 23:15, Mon 07 November 2011
http://www.omextechnology.co.uk/page2.html (http://www.omextechnology.co.uk/page2.html)

has anybody installed it on his GTT?

are there any cons?

how to connect this to the coil?

i'd like to hear some of your experiences...

thx
Title: Re: omex rev limiter and launch control
Post by: tubbyG on 00:11, Tue 08 November 2011
I just installed an armtech revlimiter today. It has flat shifting capability but I didnt get the switch for it unfortunately

Launch controll would be awesome B-)

Was really easy to install the armtech device, in this pic you can see where I mounted it on the aei unit.
It connects to the coil +tve and -tve, with a ground also.

(http://i880.photobucket.com/albums/ac2/Phase2-tungy-gtt/DSC00534.jpg)

I can get you another pic which shows exactly where you connect the wires to if you like
Title: Re: omex rev limiter and launch control
Post by: Ruske on 00:39, Tue 08 November 2011
yes i'd like a more detailed pic, if you can provide me

thanks
Title: Re: omex rev limiter and launch control
Post by: tubbyG on 16:48, Tue 08 November 2011
here you go, .......this is what I used as a guide to connect the wires


(http://i880.photobucket.com/albums/ac2/Phase2-tungy-gtt/coil.jpg)
Title: Re: omex rev limiter and launch control
Post by: Ash-Lee on 18:57, Tue 08 November 2011
When i fitted an Armtech rev limiter i removed the coil and soldered the 2 wires onto the contacts the coil pushes into.

Or, as above, you could drill the plastic to uncover the one connection.
Title: Re: omex rev limiter and launch control
Post by: Ruske on 19:49, Tue 08 November 2011
tubby, you are my savior...

thank you very much!!!

thx also to you ash