RENAULT5GTTURBO.COM

TECHNICAL ISSUES => Renault 5 GT Turbo => Topic started by: mgree10 on 17:43, Fri 21 October 2011

Title: ktec uprated actuator
Post by: mgree10 on 17:43, Fri 21 October 2011
need some help guys.....fitted a ktec uprated actuator....anyone give is photos or drawin the best way to convert to the single port.......cheers mark......uprated turbo on the car,looking for the best way to adjust the actuator to suit turbo etc?
Title: Re: ktec uprated actuator
Post by: markey mark (bd) on 17:45, Fri 21 October 2011
Put some preload on the actuator (shorten the rod) to get the boost you want.

To plumb it up run a vacumn pipe from the actuator port to the front port of the carb top. Block the one on the carn and other on carb top off or loop them together.
Title: Re: ktec uprated actuator
Post by: mgree10 on 11:23, Sun 23 October 2011
apprecate it...thanks