Author Topic: Rolling road booked at BD Engineering- Sittingbourne/Kent  (Read 2698 times)

alexwebber

  • 150BHP Member
  • **
  • Posts: 22
    • View Profile
Hi. For all that live in Kent....i've booked up for a rolling road sesh at BD Engineering this thursday as year long project flew through the MOT yesterday....... WAHA

Gona stay with the standard T2 turbo but upping the boost to 14psi. Got uprated intercooler and Samco pipes with a group A head gasket so all sould be alright.......maybe :roll:

Will keep you posted

alexwebber

  • 150BHP Member
  • **
  • Posts: 22
    • View Profile
Re: Rolling road booked at BD Engineering- Sittingbourne/Kent
« Reply #1 on: 19:26, Thu 17 March 2011 »
Right...... car all running nicely now!!
13.5psi 143.5bhp & 152.4lbft.

The rolling road bloke (Andy) didn't want to nail it to much as the piston rings have only bedded for 100 miles
Running standard cam, T2 turbo & uprated intercooler

Don't know if i have a standard diff coz at 88mph the revs were 5633rpm... probably in 4th? Does that sound right?

BTW..... i would recomend BD Engineering as he didn't hang about, rolling roaded, adjusted tappets & changed the 2 jets in the carb... 110

nadgtt1982

  • 200BHP Senior Member
  • ****
  • Posts: 443
    • View Profile
Re: Rolling road booked at BD Engineering- Sittingbourne/Kent
« Reply #2 on: 21:31, Thu 17 March 2011 »
Sounds good matey, ill have to have a word with him about tuning mine up. Only thing is i want to run about 20psi on a T25 and i know the carb will need the 2nd stage drilled etc etc, so if he just tells me he will change a jet then i know not to go with him. Enjoy driving the car fella :)

alexwebber

  • 150BHP Member
  • **
  • Posts: 22
    • View Profile
Re: Rolling road booked at BD Engineering- Sittingbourne/Kent
« Reply #3 on: 10:53, Fri 18 March 2011 »
The bloke seems to know his stuff so i would think he would go through everything as he did with mine. Mine was running too lean, so he changed 2 jets in the carb. Tickover is much better without hesitation too.

I'm thinking i want a T25 now :lol:

01mlacey

  • 150BHP Member
  • **
  • Posts: 36
    • View Profile
Re: Rolling road booked at BD Engineering- Sittingbourne/Kent
« Reply #4 on: 23:53, Wed 23 March 2011 »
143.5bhp & 152.4lbft. in a r5 i bet thts crazy

sounds like a fair price aswell

i need my polo rolling roaded to set up my bike carbs set up

alexwebber

  • 150BHP Member
  • **
  • Posts: 22
    • View Profile
Re: Rolling road booked at BD Engineering- Sittingbourne/Kent
« Reply #5 on: 07:38, Thu 24 March 2011 »
Hi mate. Yep it feels pretty quick especially in 1st 2nd & 3rd!. Bike carbs on a polo sounds a bit mad! ...............Good lad!