Author Topic: oil return pipe  (Read 720 times)

mrmike123445

  • 150BHP Member
  • **
  • Posts: 24
    • View Profile
oil return pipe
« on: 17:53, Tue 03 November 2009 »
Does anyone know where i can get the rubber oil return pipe that goes on the sump? I've tried local dealers and they say it discontinued and cgb is like 28 which is pretty dear for a few inches of pipe.

Ash-Lee

  • Global Moderator
  • 200BHP Senior Member
  • *****
  • Posts: 4208
    • View Profile
Re: oil return pipe
« Reply #1 on: 22:35, Tue 03 November 2009 »
Worth noting theres 2 different types of setup for the oil return pipework.

mrmike123445

  • 150BHP Member
  • **
  • Posts: 24
    • View Profile
Re: oil return pipe
« Reply #2 on: 09:40, Wed 04 November 2009 »
Whats the differences between the ph1 and 2 pipes?

Ash-Lee

  • Global Moderator
  • 200BHP Senior Member
  • *****
  • Posts: 4208
    • View Profile
Re: oil return pipe
« Reply #3 on: 16:15, Wed 04 November 2009 »
Good question.

I think the phase 1 is wider, also the metal part of the pipework is longer with a rubber 90 degree elbow at each end.

Phase 2 is a bit narrower, shorter metal pipe with a longer rubber section coming from the turbo.

However i might of got them mixed up, mines a bit of a mix and match of phase 1 and 2 parts. As long as you know which one is fitted to your car then you can't go wrong.

Big Steve Raider

  • 170BHP Member
  • ***
  • Posts: 121
    • View Profile
    • http://s306.photobucket.com/albums/nn259/BigSteveT/Raider/
Re: oil return pipe
« Reply #4 on: 00:02, Fri 06 November 2009 »
Just get on e-bay and buy a 22mm ID Silicone elbow!  8)