Author Topic: 5 project  (Read 5974 times)

mikebrfc

  • 170BHP Member
  • ***
  • Posts: 57
    • View Profile
(No subject)
« Reply #15 on: 01:13, Sun 26 July 2009 »
wer bouts in ireland lad? just gatherin parts at the min,gona sort the chasis then build th engine
keep the machinery between the greenery

r5 turbo1.7

  • 130BHP Member
  • *
  • Posts: 14
    • View Profile
(No subject)
« Reply #16 on: 17:03, Sun 26 July 2009 »
:shock: tyrone lad!!Have a few bits and bobs gathered up ,bits are hard to get here!Where are you at :roll:

mikebrfc

  • 170BHP Member
  • ***
  • Posts: 57
    • View Profile
(No subject)
« Reply #17 on: 22:58, Sun 26 July 2009 »
im in crumlin, just outside antrim. Where bouts in tyrone, i have family in plumbridge. I know, parts are scarce, and it's a small fortune to get it posted from england
keep the machinery between the greenery

r5 turbo1.7

  • 130BHP Member
  • *
  • Posts: 14
    • View Profile
(No subject)
« Reply #18 on: 21:29, Mon 27 July 2009 »
Ive got wide mouth front bump scoby type without  big lightholes and a tatty back one if there any good too you?Your family aren,t mc cullagh by any chance from the plum lol? :D

mikebrfc

  • 170BHP Member
  • ***
  • Posts: 57
    • View Profile
(No subject)
« Reply #19 on: 21:52, Mon 27 July 2009 »
unfortunately not, i'm going to keep the campus prima look and laugh at tatty scooby people as they are smoked by a 1.4. Aye, Declan owns the fruit of the plum? He's my mums cuz lol
keep the machinery between the greenery

mikebrfc

  • 170BHP Member
  • ***
  • Posts: 57
    • View Profile
(No subject)
« Reply #20 on: 12:06, Sat 29 August 2009 »
been doin some shopping

R19 wheels


polybushes



new wish bones, ball joints and track rod ends



Got the bushes, wisbones and track rod ends from cgb, very good to work with

gt turbo anti-roll bar


and quite an embarasing omp strut brace, got it off ebay and i thought i was putting in a maximum bid but it was actually just a bid, basicly, the guy must have been very happy with his sale fs



picked up some cheap discs which are quite large



and some konis that need a refurb, but didnt cost me too much


that's it for now, few more bits and bobs to get for the suspension and then hopefully i can send it off to my cousin who i just found out is a sprayer and has been for 25 years, so hes my new best friend lol.
keep the machinery between the greenery

bazr5gtt

  • 200BHP Senior Member
  • ****
  • Posts: 1003
    • View Profile
(No subject)
« Reply #21 on: 02:18, Thu 03 September 2009 »
hey bud where did you get em discs from,been looking to go big for a while  8)

mikebrfc

  • 170BHP Member
  • ***
  • Posts: 57
    • View Profile
(No subject)
« Reply #22 on: 19:15, Thu 03 September 2009 »
i think they're for a renault 21, bought them off a mate, 238mm and i hope it's enough to stop the car. Sourced a broken evo 6 so as soon as i have the money the discs will be clamped by brembo 4 pots  :D
keep the machinery between the greenery

bazr5gtt

  • 200BHP Senior Member
  • ****
  • Posts: 1003
    • View Profile
(No subject)
« Reply #23 on: 23:45, Fri 04 September 2009 »
sweet bud aye there excellent calipers they fairly stop my evo :lol: did your pal buy them off ebay? 8)

mikebrfc

  • 170BHP Member
  • ***
  • Posts: 57
    • View Profile
(No subject)
« Reply #24 on: 16:30, Sat 05 September 2009 »
if they stop an evo they shouldnt have any problem stopping a wee 5. To be honest, i have no idea where he gets half his stuff, he has parts for evrything, he even has a clio williams wide track that i'm considdering taking from him. I think hes actually on this site, fatman you call him
keep the machinery between the greenery